Oil Water Separators

The Kwikflo coalescing plate separator is an enhanced gravity separator capable of removing oils & solids. It utilizes the difference in specific gravity between two or three immiscible components of a liquid stream for separation.

Oily water influent is introduced into an inlet chamber by means of a pump. Heavy solids settle out and 100% oil slugs rise immediately to the surface. The remaining oily water mixture flows through a stack of closely spaced, corrugated polypropylene plates. Both the smaller oil droplets and the fine solids are progressively separated. Downstream a baffle or oil dam prevents the collected oil from entering the outlet weir.

Drains are provided in the sludge hopper for the removal of solids. Oil skimmers are provided for the manual or automatic removal of oil. Regular cleaning of the plate packs with hot water is the only maintenance requirement under normal operating conditions.

Kwikflo

1000L

CONSTRUCTION

  • Polyethylene or stainless steel tank
  • Inlet Pipes – 32mm pressure UPVC CAT 17 socket
  • Outlet Pipe – Water 50mm DWV UPVC V66 Socket.
  • Oil 50mm DWV UPVC V66 Socket
  • Sludge Hopper – 50mm UPVC incorporating 50mm PVC ball valve
  • Tank Construction – Chemical resistant UV stabilised polyethylene thickness 5mm
  • Lid Construction – Chemical resistant UV stabilised polyethylene thickness 5mm

1000L

Specifications

Length
1410mm
Width
420mm
Height
1510mm
Nominal Volume-Litres
200
Approx. Weight
(Free Standing)
(Including in-tank fittings & standard lid) (Excluding pump)
45kg

1500L

CONSTRUCTION

  • Polyethylene or stainless steel tank
  • Inlet Pipes – 32mm pressure UPVC CAT 17 socket
  • Outlet Pipe – Water 50mm DWV UPVC V66 Socket.
  • Oil 50mm DWV UPVC V66 Socket
  • Sludge Hopper – 50mm UPVC incorporating 50mm PVC ball valve
  • Tank Construction – Chemical resistant UV stabilised polyethylene thickness 5mm
  • Lid Construction – Chemical resistant UV stabilised polyethylene thickness 5mm

1500L

Specifications

Length
1500mm
Width
750mm
Height
1510mm
Nominal Volume-Litres
300
Approx. Weight
(Free Standing)
(Including in-tank fittings & standard lid) (Excluding pump)
60kg

2000L

CONSTRUCTION

  • Polyethylene or stainless steel tank
  • Inlet Pipes – 32mm pressure UPVC CAT 17 socket
  • Outlet Pipe – Water 50mm DWV UPVC V66 Socket.
  • Oil 50mm DWV UPVC V66 Socket
  • Sludge Hopper – 50mm UPVC incorporating 50mm PVC ball valve
  • Tank Construction – Chemical resistant UV stabilised polyethylene thickness 5mm
  • Lid Construction – Chemical resistant UV stabilised polyethylene thickness 5mm

2000L

Specifications

Length
1500mm
Width
750mm
Height
1510mm
Nominal Volume-Litres
300
Approx. Weight
(Free Standing)
(Including in-tank fittings & standard lid) (Excluding pump)
60kg

3000L

CONSTRUCTION

  • Polyethylene or stainless steel tank
  • Inlet Pipes – 32mm pressure UPVC CAT 17 socket
  • Outlet Pipe – Water 50mm DWV UPVC V66 Socket.
  • Oil 50mm DWV UPVC V66 Socket
  • Sludge Hopper – 50mm UPVC incorporating 50mm PVC ball valve
  • Tank Construction – Chemical resistant UV stabilised polyethylene thickness 5mm
  • Lid Construction – Chemical resistant UV stabilised polyethylene thickness 5mm

3000L

Specifications

Length
1500mm
Width
750mm
Height
1510mm
Nominal Volume-Litres
300
Approx. Weight
(Free Standing)
(Including in-tank fittings & standard lid) (Excluding pump)
60kg

Diaphragm Pumps

Features & Benefits

The Kwikflo KDP range of pumps are a mechanical diaphragm pump that uses a heavy-duty gearbox coupled to an eccentric block to actuate the diaphragm. It is belt driven by pulleys which enables it to use a variety of drive options.

With its heavy-duty construction, and its ability to run dry and self-prime, the KDP pump is suitable for a wide range of applications including dewatering, transfer, oil skimming and oil/water separation.

  • Suction lifts to 7.5m
  • Rapid self priming
  • Will run dry without damage
  • Will operate on snore
  • Will handle abrasive liquids
  • Will pass solids up to 80% of port size
  • Heavy Duty, compact construction
  • TEFC electric motors fitted as standard
  • Special electric motor enclosures as an option